Barefoot wood pellets
2009 Pellet Test Results
Barefoot Pellets are periodically tested with an outside independent testing laboratory, Twin Ports Testing Inc. of Superior, Wisconsin.
Below is a chart which summarizes the results of all 2009 testing for our pellets.
|
2009 Test Results
Average for the Year |
Super Premium
Standards |
||||
| % Moisture |
4.194%
|
Less than 6%
|
|||
| % of Ash Content |
0.426%
|
Less than .5 %
|
|||
| Fines |
0.160%
|
Less than .50%
|
|||
| Bulk Density |
46.8
|
40 - 46 lbs./cu ft
|
|||
| Durability Index |
98.1
|
>97.5%
|
|||
| Heating Value - BTU / lb | As Received |
7899
|
|||
| Moisture Free |
8244
|
||||
| Material | Hardwood | ||||
Barefoot Pellet Company is a member of the Pellet Fuel Institute.
- Barefoot Wood Pellets are exceptional because of the quality and the cleanliness of the raw material used to make pellets.
- Barefoot Pellets are made with clean sawdust and other clean wood waste material primarily generated in the manufacturing of hardwood lumber into various wood products such as kitchen cabinets, hardwood flooring, etc.
- Barefoot Pellets utilize sawdust from a variety of hardwood species from the renewable & sustainable forests of Pennsylvania and New York. These species include Cherry, Maple, Red Oak, Hickory, Walnut, and White Oak.
- Barefoot Pellets are independently tested periodically and meet the standards for super premium pellets as established by the Pellet Fuel Institute.
- Barefoot Pellets have superior low ash content due to the quality of the hardwood raw material used.
- Barefoot Pellets are extremely efficient in terms of low emissions, clean burning and high heat.
- Barefoot Pellets are protected from moisture by our bag hoods which cover all shipments of pellets to our distributors.
Barefoot Pellet Company
PO Box 96, Route 14 North
Troy, PA 16947
Email:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
