7 comments

• Comment Link Sunday, 12 February 2012 19:58 posted by J Ouart

  Great pellets which I wish i would have bought more, High heat output, low ash. only ones I found that haven't clumped in my burn pot. Much better the Propellets, zero saw dust
• Comment Link Friday, 20 January 2012 10:38 posted by Michael Reinhardt

  looks like we al agree that in deck pellets are of poor quality. I too have to clean the burn pot frequently, thought maybe the stove was not working up to par, but after a thorough cleaning i had only a slight improvement. Running the stove on high while away is not an option, it fills with ash to the auger and shuts down on over temp.
• Comment Link Wednesday, 04 January 2012 18:50 posted by roberta smith

  Have a pellet stove model 5660 and just purchased some pellets from Tractor/Supply here in mid-Michigan. Indeck energy wood pellets made out of Wisconsin..not pleased at all. Very high maintenance..must clean the pan out at "least" once a day if not more...very dissapointed.
• Comment Link Monday, 07 February 2011 18:06 posted by Roy

  Not happy With these pellets. They burn ok when it's not very cold outside,But when it is I can't get much heat out of them and they simply just are a mess.
• Comment Link Thursday, 23 December 2010 12:34 posted by Jim

  I'm not happy! I've purchased pellets for 5 years now and although these Indeck pellets produce good heat, but they are by far the dirtiest pellets I've ever used! The klinkering in the burn pot is so bad, I have to clean it out every day and that's on the lowest setting. After one day the pot is so full the pellets roll off the top and fall to the bottom of the firebox. Last year I burned Pennywise Pellets made by Marth and I thought these were the dirtiest pellets ever because I had to clean the stove every 2-3 days. These pellets have them beat in spades! In the past I have had to clean the stove about once every 5 days or so with other brands, so that is the standard that I'm basing my review on.
• Comment Link Wednesday, 24 November 2010 02:16 posted by admin

  Hey AJ. I'm hoping that my stove performs better. I just bought a skid (1.3tons) from woodpellets.com I have never burned them before so I look forward to a comparison reviews. Do you have any pics to the amount of ash? I have found that with a really dense pellet, you need lots of air. I ran into that with the New England pellets 2 years back when the density of the pellets were crazy. good luck!! Admin
• Comment Link Monday, 22 November 2010 05:46 posted by AJ

  After comparing a half dozen different pellets I'd have to put Indeck in the bottom 1 or 2. The pellets are a very good density as claimed. The dark color and higher than my "normal" pellts ash remnents is my basis for the reveiw. The dark color tells me there is more bark in the blend and that is reinforced with the higher ash content left in the firebox.
  It pains me to submit a negative review on such a subjective product.
  Pellet performance does differ depending how hot and what damper settings you are using. Each pellet stove is a unique animal and will perform a bit differently depeding the pellet and the operators methods.